At window task bar, there are a few tray icons, such as network connection
icon, soft kb icon, active sync icon...
I hope to change the locations each other.
for example, fixing the soft kb icon to most left side against other icons...

My embedded device is running Windows CE 5.0 and is up to date up to
the Dec. 2006 QFE's, which is running on a PXA270 module. I have been
working on a driver for the SPI bus that has been running considerably
slowly, taking 100 ms per byte. Currently, we are transmitting and

Dear Friends,
I read few good articles on msdn for build process and also visited
http://geekswithblogs.net/BruceEitman/category/8117.aspx.  If I do any change
in Makefile.inc or sources can I simply have to run build.exe following

Dear Friends,
From the source I got from vendor, there are two directories
c/wince500/platform/<vendor>/Eboot and  c/wince500/platform/<vendor>/fboot.
Also boot.bib can be found at

I have one big problem. I would like to run some navigation programs
on win ce 5.0 (tomtom and others), but tomtom is not campatible with
win ce 5.0!
I there a way how to adjust win ce to be win mobile or something like

I am running wince 5.0 on smdk2440. I am using Hive based registry stored in
the nand flash. Auto suspend timeout functionality was ok before ading hive
registry, the device went to standby when the preset interval elapsed. But
after adding hive registry it never went to standby.

hi,everyone,
I am in the process of Migrating wince 4.2 to 5.0,
my platform is pxa255&wince5.0,I just use the 4.2 bsp to modify.
since I have read some relative thread here,

I would like to know how I can get the bottom stack address of a thread
on windows CE.
I am currently doing this :
BOOL bKmode = SetKMode(TRUE);

My employer provides a SDK for its Win CE USB Modem driver.  This package
comprises some Dlls, Registry entries and sample applications.   We would
like to provide these components to customers that use Platform Builder as a
Catalog Item via a .pbxml file.  I’ve done some ...

Hi, Please advise.
I would like to bring up OMAP2430 hardware from TI is using WinCE. Do I have to use WinCE5.0 or winCE6.0 for this ? how to bring it up..? please advise..

We are trying to configure the Intel embedded graphics driver (both IEGD 8.0
or 9.0 BETA) for Windows CE 6.0 and directX mobile. The target resolution is
1200X768 but we have also tested 1024x768 and 800x600. To date we have
attempted a variety of static and dynamic video memory ...

I have migrated the Tcpmp Player on Wince, and I have Found as we had
added DirectDraw in the OS, the player can accomplish the DirectDraw
sub-option. But I have found someone has achieve DirectDraw in Wince
using the DDGPE.

On my Windows CE 6, I am using an HCI Bluetooth module connected over
UART. With the universal bluetooth loader (btd.dll) and the activated
UART driver bthuart.dll, this works fine.
If I reset my bluetooth device during suspend (over GPIO because of

hi,everyone
I use ax88796 which is a 10M/100M fast Ethernet controller compatible
with ne2000 for network,and my platform is pxa255 &wince4.2.
now,my configure the memory control register of pxa255 and it

I'M using Platform Builder for Microsoft Windows CE 5.0.
I purchased a license 5 months ago and all worked fine.
But today Platform Builder show this message when I build my project:
makeimg: Check for