Developers - topics related to Windows CE Platform Builder

Thread preview

Thread	Last Post	Replies

CE6 Start bar - OnTop and AutoHide registry values	12 Jul 2008 19:11 GMT	2
Does anybody know how to work with the OnTop and Autohide registry values in VS2005 and CE6? Using active sync, I have verified the registry locations, the default values do change when the parameters are changed in the right click properties box on the running device. I have set ...
application memory area	12 Jul 2008 17:19 GMT	2
i am working on SMDK2410 BSP and my device boots in kiosk mode. i want to know that my managed compact framework application will run in NK memory area or it will run in RAM memory area. FILES
Problem building BIOSLOADER [WinCE6]	11 Jul 2008 21:50 GMT	2
I am trying to make a very small customization to the BIOSLOADER, but I can't get it to compile. I'm trying to recompile WINCE600\PLATFORM \CEPC\SRC\BOOTLOADER\BIOSLOADER\LOADER I am using the "Open Build Window" context menu item with "build -c".
Change button look	11 Jul 2008 16:39 GMT	1
Now when I compile ce image I have ordinar buttons. I would like to have rounded... Is it possible to change button look? Thanks,
Cursor can't move to most left side	11 Jul 2008 10:19 GMT	2
I run WinCE 6.0 in the evaluation board. I use HID mouse to operate it. When cursor moves to most left side, the cursor would be stopped
NOR FMD	11 Jul 2008 06:44 GMT	2
I have a NOR with 512Kbytes, only support buffer program method. The NOR only can be write after the block was erased (blank). I would like to modify strata FMD to this NOR, i found the most different between those two NOR is at the FMD_WriteSector function.
VMProcessPageFault in power handler ??	10 Jul 2008 19:17 GMT	10
I occasionally get "VMProcessPageFault Error: Page Fault occured while in power handler! Address = 0xxxxxxx" and it never recovers. It only does it intermittently on a resume after a suspend operation.
Active Sunc large amount Data Transfer	10 Jul 2008 16:57 GMT	7
Hi, I am using wince 5.0 with PXA270. The target device and host PC (Windows XP) are connected with Active Sync 4.5 over USB. I tried copy file of 30MB size from Host PC to target device. Active Sync connection is breaking after
want to show progress bar while booting	10 Jul 2008 16:15 GMT	1
i want to show a progress bar or a animation like windows XP boots. how can i make it possible.
single threaded status at suspend mode.	10 Jul 2008 14:58 GMT	2
When system goes into suspend mode, the system goes into single threaded. In this case, the single thread means the kernel thread? what does it mean by the single thread?
RNDIS Host Side in WinCE 6	10 Jul 2008 14:16 GMT	4
I'm trying to connect 2 CE Devices and to establish a USB communication via RNDIS. My configuration : Client Side (iMx27) : - RNDIS Client OS Component.
Video orientation change notification to driver CE5.0/6.0	10 Jul 2008 09:57 GMT	1
My driver needs to know when video orientation changes. I do not want to make a helper application with a top window to receive WM_SETTINGCHANGE message. Is there any way to ask the OS to notify my driver?
IESIMPLE	10 Jul 2008 06:14 GMT	6
How can does default use IESIMPE? or user can use command change IESAMPLE/IESIMPE
oal startup	10 Jul 2008 03:17 GMT	4
I am starting the XIP for the new NOR flash under window CE 5 using pxa270 platform. The boot loader was working fine but i am not able to start the kernel. Do any one know where is the first code the kernel run? Same starup as
NDIS power management - D2, D1 states	10 Jul 2008 02:30 GMT	3
We have a enet driver for a LAN911x chip. This chip is nice, as it has several low power mode states. We have no issues with run state and the suspend state (NDIS D3), but I've been trying to use a NDIS D2 state. The chip is being programmed to a power state that will ...