Would it be possible to do something interesting with a CPU that has
hyperthreading under CE 6.0 even if it is not supported by the OS scheduler
or compiler?
Would it be possible to execute something on that "separate" thread

From some ce device, I have ever copied some dll or exe files from windows
directory to other location.
And I know the files from modules section are removed with file header
information. So the files can't be handled as file. But the files of files

Hi, Professional Buddies,
Platform CE 6.0
I use IXP 435 CPU, and it connects a 256MB NAND flash at expansion bus
(CS3).

I am starting my first Windows CE 6 device driver and am having
trouble with the Memory window of the debugger not showing me areas of
physical memory (the registers used to configure my processor's GPIO)
that i have mapped via VirtualAlloc and VirtualCopy. My code looks

I develope an MFC application in VS 2005 and an OS design with PB (CE
6.0). I use two instances of VS 2005, one to download the image to the
target device and other to write the application. So far, there is no
problem in building the platform, downloading it to the target, and

can any one give me the list of files to be modified if i replace the SDRAM
with higher capacity.

Was this post ever resolved?
http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?&query=VSX-61
54&lang=en&cr=US&guid=&sloc=en-us&dg=microsoft.public.windowsce.platbuilder&p=1&
tid=d599b9ac-bc95-44bb-aff0-50a51bf07423&mid=d599b9ac-bc95-44bb-aff0-50a51bf0742
3
I am having ...

I want to know if Activesync connectivity is possible over RNDIS on
WindowsCE 5.0, with PND profile in WindowsCE 5.0? If so any registry
settings need to be changed?
Thanks in Advance!

I am having trouble trying to boot our ARM 9 based target boards on CE
6.0. I
have been able to successfully boot the board under CE 5.0, but after
porting the BSP to 6.0, I can not get

Platform: Windows CE 5.0, ARMV4I
I have a wireless interface stack that works well on other platforms
but on this one particular platform we are seeing RAS drop the
connection as soon as RAS reports state RASCS_Authenticated. We

I am developing an appliacation in WINCE 6.0 which will launch the
ceplayer.exe with the media file as a command line argument.
What i need is ceplayer.exe should run in fullscreen by default without
manually selecting the view->fullscreen??

PXA270, Mainstone II
It is a mistake in our code. We dont have FPGA at all and this
statement has been residing in the code for long.
DCD     0x90B00000, 0x08000000,   1     ; MAINSTONEII: nCS2 (lower

   I use PB 6.0, and my target platform is IXP 435.
We use the 256 MB NAND Flash (K9F5608UOD) connected to the expansion
bus CS3.
It seems has a driver in the "PUBLIC\COMMON\OAK\DRIVERS\BLOCK

I am working on PB5.  I am considering how to install/deploy software updates
for our users.  Our OS uses a RAM/ROM FS but our device does power off often.
Therefor, I loose everything which is not in the OS nk.bin, BUT if I put all
of our software in NK.bin, I get a large image ...

As I known, any config.bib settings like following would produce nb0 file.
    ROMOFFSET=FFFFF000
    ROMSTART = 00000000
    ROMWIDTH = 32