Does WinCE support rundll32.exe ? This exe is there in system32 folder in PC.
If we can not use it is there any equivalent exe which will load a dll and
call a function and populate the argument lists just like rundll32.exe does.
Pls help

I developed a SD card. My develop board is based on xscale. I want to
directly access registers in SD host controller for debugging SD card and
send the content to PC by using Serial port. How to do it? Thanks,
I downloaded WinCE 5.0 platform builder. I can send information by using ...

I have developed a USB 2.0 to Ethernet device driver (AX88772.DLL) on CE PB
5.0. The network function and all driver functions work fine except the USB
device Hot-Swap function under USB 2.0 host controller. After a couple times
Hot-Swap AX88772 USB device (i.e. to insert/remove ...

I have 18Bit (6:6:6) color TFT,but i want to use it as 16 bit (5:6:5) color
mode.
for RED and Blue components which bit should i skip MSB or LSB.

In my project I'm use ARM 1176JZF-S processor, the chip provided by Samsung
(S3C6400).
My queries are:
1. Does Microsoft WinCE Platform builder supports ARMv6?

I am working on wince5.0(ARM).i am using 640x480 LCD.
My LCD is working fine at boot time but as soon as display driver loads
nothing will appear on the LCD(Black).

I'm working on Windows CE .net 4.2 Platform Builder.
I have a BSP that support my board.
I want to ask, can I use the BSP on Platform Builder 5.0?
thanks a lot....

Hi ,all
  I chose the "Chinese(China)" in locales catalog ,and chose "Chinese" in
default locale.
I built the os and downloaded it to the target.I found  messy code for

i am using 128MB RAM.
it is working fine till OEMInit function after that it got stucked.
The following Message is appearing o the serial:
Microsoft Windows CE Ethernet Bootloader Common Library Version 1.1 Built

I would like to operate a Wavecom modem through USB, under CE (not WM.)
As a standalone USB Communication Device Class + virtual COM port feature is
not given with the Platform Builder (4.2 through 6.0), I would like to know
what are the best alternatives, from your experience.

I'm trying to bring up a Windows CE 6.0 image.
To do this I have a 4 GB compact flash, with a 256 mb primairy partition.
I copied all the bootdisk files and nk.bin to the compact flash.
When I start the computer it shows the dos startup menu.

I am working on i.MX31 based Board with BSP from Freescale. Linux is working
well on our board, everything works fine. So I tried to port WinCE 6.0 on our
board.
Now I have the following problem under Linux we added for the GPIOs the

hi,everyone
I am in the process of migrating bsp from 4.2 to 5.0.
and now I am almost done the job.
I can run my system under 5.0.

Can we build and makeimg 2 different Platform at the same time use 2 opened
command shell scripts ?
Thank you .

I'm using a custom build ver CE5.0.
it doesn't matter if I use the MS build datetime GUI or my own program call
to SetLocalTime(),
there seems to be a limit on the date I can change(year only?).  But I