I am developing OX16PCI954(4 channel PCI Serial Device).
Now, Only ONE channel is attached. Because, Only ONE
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\PCI\Instance\OX16PCI9541] is created.
So, I tried to create FOUR INSTANCE as the following.

I was wondering if somebody actually uses the (T)Exfat filesystem that
comes with CE6. On our system(x86 intel ICH4 chipset, using the
standard ATAPI driver towards IDE Compact Flash and Hard Disk) it
seems fairly unreliable.

I am new to WinCE and trying to build the CE image for the Atom Processor
from Intel.
I installed all visual studio 2005, visual studio 2005 sp1, Win CE6.0, Win
CE 6.0 sp1, Win CE 6.0 R2.

Hello experts,
one engineer has created a .cab file for Windows CE 6, which contains
multiple instances of the same file name, to be located in different folders
on the device (actual content may be different, but file name is the same).

Please could someone tell me where in the CE 6.0 R2 source tree I can find
the source files that constitute the FAL?
Best Regards-
Phil

I'm trying to connnect vby seiral comunication a MC35 Siemens GPRS modem to
my Windows ce device (smdk2443).
I set configuration on Networking and dial-up connection by when I try to
run connection wince reports an error:

I am using MX31 ADS board for Windows Mobile 6. While I am trying to build
using
"Base OS - SMARTFON MX31 Retail" (blddemo -qbsp) it gives the following error
BUILD: [01:0000000159:INFO  ] Directory:

I attempt to support 1GB ram size in wince 6.0
I've modified _dwOEMTotalRAM in the startup.asm as following:
_dwOEMTotalRAM:
       ;dd                              04000000h

   I wanted to include support for high capacity SD card into our BSP but
the card is not detected and/or mounted in the system.   I am developping
with PB 5.0 for a PXA270 on our own BSP based on Mainstone.  I have
installed all the QFEs up to October 2008.

we wanna develop a platform BSP with ARM926 CPU?
How could create a BSP in Wince6.0 for Arm926?
should we start from clone H4sample(ArmVI) BSP?
Can the wince6.00 compiler process the Arm9 assembly directives ,for

I am porting an existing CE 5.0 based driver to CE 6.0 and am having issues
with understanding the buffer manipulation requirements.
The existing driver was like a user DLL with InterruptInitialize etc. in it.
There were no driver entry points like xxx_Init , xxx_Open etc. The ...

I'm trying to communicate between the PC and my WinCE 6.0 device using the
USB device as a virtual COM port.
On the CE device, I changed the default USB function client from
Serial_Class to USBSER_Class. On the PC I have not been able to register the

I've been trying to track down a bug lately that only shows up when we
use an image of size 0x1A8066C (very much larger or smaller and no
problems show up.)  The problem manifests itself as a crash when
trying to GetRomInfo when the EventLog.dll is initialized (a .nls file

I am using WinCE 6.0 and the platform is a custom platform derived from
ARMV4I and having PXA270 processor.
A WiFi chip is connected to the processor via the SDIO lines with 4 data
lines, a command line and a clock line. When the system boots up and before

My config: OS : Windows Mobile 6.0 Professional running on Microsoft
Device Emulator V3
with OS image: Windows Mobile 6 SDK\PocketPC\Deviceemulation
\0409\PPC_USA_GSM_VR.BIN