I would like to set the SIP to the large keyboard progomatically. I'm
using VS.net 2003. Any help be much apprecaited.

An app that i have always goes to the same place to get its data files.
I need to be able to access EITHER of TWO different sets of files.
Currently I do this by renaming the directory to one of either of the
associated directories.

I'm new to wince device driver. i have to write a driver for a otg
controller (which has usb host controller and  usb device controller). i have
gone through the documentation found with pb, where in only host controller
driver and function controller driver are mentioned.

I am using a embedded PC for a platform.  The Bios allows us a memory hole
between 15M and 16M which we want to use for our hardware devices.  Is there
a way to tell CE to work around this hole?  It seems that all PCs have a 384K
hole above 640K which is a similar situation, but ...

We have a display device (electronic signs) based upon an x86 processor
running Windows CE 5.0.  They do not have keyboards or mice and are mounted
on walls and such.  I would like to be able to connect to the devices via
LAN and remotely control them for diagnostics purposes.  I ...

I have been trying to get eMbedded visual c++ to install on my Windows XP
professional PC. I get a series of messages and then it fails. The install
file is
evt2002web_min.exe . I wondered if there might be a newer version but I

Just a note that we'll be hosting an online chat tomorrow concerning Windows
CE 5.0! Members of the development team will be on hand ready to answer your
questions, so bring 'em on!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~­­~~~~~~~~~~~~

I'm a hardware designer/programmer and we are intending to develop a
specialised hardware equipment to perform specific custom inhouse
applications, built on the windows mobile 2003 core - CE 4.2 if I am correct
.

I am using a Casio DtX10 handheld with windows ce.net 4.1 operating system.
I need to find a wireless pcmcia card that runs in the handheld and with
wpa-psk security enabled (windows ce.net 4.1 does not support wpa).
I tested the cisco aironet 350 card but does not support wpa.

I want to use command line arguments in a console application.  Yet
regardless of what was entered on the command line, argc and argv
contain bogus values.  Why?
Setup:

I want to start an application from an other application under widnows CE
my startapplication is programmed in C#
I would be glad ich anybody could help me.
bye  michael

I am using embedded Visual C++ 4.0. Everything worked fine in my DELL
desktop with Win2K professional and 2G Hz processor.  After I switched my
computer to a Antec with Win2K professional and 3211MHz processor, and
reinstalled eVC4.0 and SDK,  I found I almost could not debug my ...

I have been porting a data acquisition driver/application from Linux to CE5.
Everything is working fine so far except for the performance under CE5. I am
using exactly the same hardware and under Linux the full application (data
acquisition and HDD storage) takes up about 10% of ...

Under certain conditions (that take hours to reproduce), our application
exits to the desktop with no error message.  Worst of all, it leaves all
motors running, since none of the controlled shutdown paths (like
WM_DESTROY) seem to be getting called.  This causes bags of blood to ...

If I want to modify the IP address,could I use the browser or the other way?