I ran the winsock performance test to test the throughput of my 100Mbps
ethernet driver.But, I'm not able to conclude anything on the
performance of my driver.The typical output for "TCP send throughput"
is as follows:

Hi Steve  / K.S.Huang or an other gentleman,
I am not able to run USB host controller driver test in windows CE
5.0.I'm not even able to find the documentation for this test also.
The USB host controller is on my target board and for that, the driver

Can I use VPC2004 SP1 and the winCE emulator (both based on the same virtual
pc fom connectix) on the same machine ?
In fact, when I want to use "virtualswitch" mode for PPC 2003 Emulator, I
encouter this error when I launch the PPC 2003 image with the emulator:

I am facing a problem when running audio CETK tests with KITL(as transport)
& SW Mixer enabled.
"ERROR:  expected playtime is too long" comes randomly in tests that measure
playback duration with KITL. CETK plays tones of various frequencies and of

My smartphone has a SDMMC card. When I do the test, all the tests are
skipped. I understand it could be the default storage profile causes the
problem, because the default profile is "PCMCIA". So I use -p SDMMC to
specify the right profile. This time, the tests are failed and can't ...

In "IR Port Test (Winsock 1.1)" and "IR Port Test (Winsock 2.0)",  we have
two failed items, "COM Port Usage" and "bind hard coded lsap-sel".
As I know, most IR winsock codes are MS codes.
How can I solve these two issues ?

Could somebody clarify what do I need to do to build NDIS Test Server:
ndtserver.exe
I found the source code for the server in the
C:\WINCE420\PRIVATE\TEST\NET\NDIS\NDT\SERVER

WinCE 5.0 documentation says to install ndis driver at the personal desktop
computer for performing the NDIS performance test.
link:
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/wcedebug5/html/
wce50tsksettingupsupportingdesktopcomputerforndisperformancetest.asp

DO any one know  the ioctl codes used for USB devices ...
Where can i get  the file usbioctl.h
thanx.

Hi, all
I added environment variable "__sysgen_graphedt = 1",
then I can use Graph Edit tool under windows CE 4.2.
But I added the same variable under windows CE 5.0,

I am running Flash R/W Performance Test using following commandline
tux -o -d Flshwear -c"/disk DSK:"
I have tried DSK0: to DSK9: but on board flash is not getting recognized and
all 124 tests are failing. I am stuck here. Kindly help me.

I have an all-fail (9 fail) result in Read/Write test in MMC card, though the
card is perfectly functional for normal read/write through File Explorer.
This card is also pass on the other tests, i.e API test, File system test,
Benchmark test.

I have the following problem: If the LAN is disconnected, the Emulator
cannot see and access the drives from the local machine. Normaly, if the LAN
is connected the Emulator (within Visual Studio .NET 2003) has access to a
directory on the local machine by typing ...

Has any one got the CETK blue tooth client-server tests running? If yes,
please help me. I am unable to run Btwsvr22.exe on my server.
Thank you,
Mariam.

I wanted to know if perl and C++ scripting is supported in WinCE-5.0.
Can anyone help me on this?
Thx
Samung