| Thread | Last Post | Replies |
|
| Embedded CE5.0 CETK | 27 Dec 2006 00:10 GMT | 1 |
Does anyone know whether the CETK 5.0 works with Embedded CE5.0? When
I launch the 'clientside' on my device, I get:
"A security error of unknown cause has been detected which has
corrupted the program's internal state. The program cannot safely
|
| Logo test kit? | 14 Dec 2006 18:51 GMT | 1 |
HI all
Anybody knows where can download the Logo test kit? Thanks !
|
| ILTiming | 13 Dec 2006 23:45 GMT | 2 |
I am a newbie for testing. I am given the task to check the Interrupt Latency
measurement. I found that we have to use the ILTiming utility tool to do it.
But I am in dark as to how to go about it.
What are the steps involved in doing the test? When I ran the test ILTiming
|
| Does Storage Device Block Driver Read/Write Test and the Storage Device Block Driver Benchmark Test support testing only on specific DSK? | 13 Dec 2006 21:37 GMT | 2 |
Does anyone know whether the CETK Storage Device Block Driver Read/Write
Test and the Storage Device Block Driver Benchmark Test allow tests to be
run on specific mounted storage device only, instead of all the mounted
storage device it could find? If it is possible what are the ...
|
| monte carlo profiling | 13 Dec 2006 19:48 GMT | 1 |
I was using the monte carlo profiling for profiling my code. I couldnt
understand what did the output mention.
I wanted to know how much CPU was been used, how much registry access etc etc.
Which parameter specifies about all the details. where do i find the details
|
| One-Card Network Card Test: Test case 11: Suspend resume | 12 Dec 2006 02:21 GMT | 1 |
Looking at the source code of this test, it uses the SetKernelAlarm() API to
wake up the device. We didn't find this API on 5.0 documentation. It is
shown on the 4.2 documentation. Is this test case still valid for 5.0? We
are having problems with getting the device to wake ...
|
| Catch OutputDebugString | 11 Dec 2006 12:30 GMT | 1 |
Is it possible to use OutputDebugString on wince ?
How to catch it knowing that I am not using Platform Builder ?
|
| Remote Performance monitor tool | 08 Dec 2006 22:54 GMT | 1 |
For CETK testing how can we use Remote Performance monitor tool?
Rgds,
kumar.
|
| CETK Touch Screen | 07 Dec 2006 07:50 GMT | 3 |
Hi,
Our touch driver is working in WinCE 5.0 , but some CETK test cases are not
passed.
Why?
|
| OAL Timer Test( case 112 failed ) | 07 Dec 2006 03:05 GMT | 4 |
I have another failed case in same test.
Case 112 is High Performance Backwards Check. The value of parameter
"ullIterations" decide the for loop times. In one device it sometimes get
the
|
| OAL IOCTL Cache Test | 06 Dec 2006 20:24 GMT | 1 |
For doing the OAL Cache test PB says that,
Run the OAL Cache Test on a run-time image built from an operating
system (OS) design based on the Tiny Kernel design template. In your OS
design, implement the IOCTL_HAL_GET_CACHE_INFO I/O control (IOCTL).
|
| OAL Timer Test ( case 102 failed ) | 06 Dec 2006 09:58 GMT | 8 |
I have tested case 102 ==> Tick Count Latency/Resolution (high
priority) many
times in my device, but it always failed. I use another device with
different BSP to do
|
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage
Start New Thread