I am running Graphics device Interface (GDI) Test from CETK in my WinCe 6.0
platform which has a VGA monitor.
I run test in screen rotated at 0º, 90º, 180º and 270º, and at the beggining
of the test I get this results related with displays modes supported:

I seem to have a problem with any CETK test in WinCE 6.0 that requires
ktux.dll.
When I call "tux.exe -o -n -d oaltestinterrupts.dll" for instance,
then I get the following message:

We have a ARM926 based board which runs WinCE 5.0 with a USB 1.1 Function
Control Driver. We have taken the UFNLPBKMDD module from the PRIVATE tree
and generated a Loopback DLL for our function driver. With suitable
modification

I have run test case 2000 (Performance Test for 9600 bps) of  serial
communication test (CETK) between a desktop computer (act as master) and my
WinCE 6.0 device (act as slave).
This test reports strange transfer rates (inclusive negative values). See

I have seen in MSDN library that OAL IOCTL Tests has a ILTIMING IOCTL
Test....
Does anybody know if this test is implemented in test kit?
Help about  ILTIMING IOCTL test  belongs to Processor Info IOCTL Test...

I copied IOCTL source code from 5.0 and created as user test case in
4.2CETK. I am able to running on 4.2 without change in the source code but
test case are getting failed. The error is
BEGIN TEST: "IOCTL_HAL_GET_DEVICEID - Normal Operation", Threads=0, Seed=7174

I run RTC-Real time Functions (Windows CE6.0 Test Kit), and in test case
1280  (Rollover of RTC) I get an error with rollover of 12-31-2005 23:59:57
Output I get during test is:
     INFO: Description : Checking rollover for Month

I was trying to bring up the USB Function Serial in cold boot (connect the
cable and bring up the image) on WinCE 5.0. I have attached the enumeration
log after which the class drivers donot come up. Normally when it is
connected after the image is up, the functionality is ...

When I try to connect cetk 6.0 via platform manager the connection fails.
When the Platform Manager "Device Connection" window opens all windows CE
devices are shown, not just Wince 6.0 devices. Previous versions of this app
only display the relevant CE devices (5.0 or 4.2).

i am new in windows ce 5.0 and got some problems.
particular in CETK. the main problem at the moment is the
following:
when connecting the CETK host (developing maschine) to the target