Are these cases designed for test the performance of the FAL's balancing
algorithm? I need to know what the main purpose of these cases so that I can
pick some of these for my BSP, since these cases are really time-costy.
Thanks

My block driver exports 2k sector to FAT, and when I execute file
system API test cases, some cases failed.
To support 2k sector, I disable the sector size check in FATUTIL.
My question is does FAT file system API requires the sector size must

Dear Experts,
I want to test a block driver, but the sector size of my block device
is 2048 byte. I want to know the requirement of Block Driver Test
Cases.

I am running the serial communication test between two test boards.
Both have the same BSP on them. I am using a batch file with the
following parameters:
tux -o -d pserial -n -c "-p com2: -m -t -e"

I am using WinCE 6.0 , i have an application which sends commands via serial
port to a modem.
But COM1 is used by default by WinCE 6.0 emulator for debugging.
Could you please tell me how i can prevent WinCE 6.0 from using the COM port

Is that true?
So we have to run such tests in 0 degree?
Thanks!

Hai friends,
    Now I am trying to test wince device drivers using TUX through EMULATOR.
I am following the document tux driver lab published by microsoft.
In this before doing our own test , they told to run any standard test .When

Thanks!

I am using CETK tool kit to test File system driver on Plateform builder
windows mobile 5.0 . But problem is that my all test cases are getting
skipped. When I am using –zorch switch at command line, then all test cases
are getting failed. And when I am trying to view result, it ...

I am testing my camera on LTK, when i run quality test...
at some test case, its not able showing the image on screen on and not
able to copy to device.. So its failing ..
When i checked my image sink filter, its not been called..

The trouble started when i tried executing the filesystem
performanance test in windows embedded ce 6.0  case on a standalone
(without kitl) image. From the debug msg spew what i can understand is
the test case tries to open out a log file in /release folder on the

After running the test, the test rusult show the Polyline test and Rectangle
test are failed. But, I don't know how to analyze the result.
It shows
Polyline - Simple Polyline Test

I am porting a USB Host controller driver code that has been working
perfectly on WinCE 5.0. After porting it to WinCE 6.0, I found that HID
devices like USB Mouse and USB Keyboard works well. But when I connect any
mass storage devices like USB pen drive/USB HDD, the enumeration ...

I am performing Flash Memory Read/Write and Performance Test for NAND Flash
on WINCE5.0 and following are my finding:
when i execute  Repeat sector random Test (Test ID :1003) after executing
Repeat sector sequential Test (Test ID:1002) ,  Repeat sector random Test