I am looking for tests cases to test a USB function using RNDIS device
driver.
Is there any specific tests for this USB function client driver?
Any other place with tools for this purpouse?

"After I connect the device up with ActiveSync to the PC and the I try
to connect to the device using AppVerifCE.exe on the desktop, the
application just hangs and CPU gets pegged at about 95% forever."
Is a post from someone a year ago, with no solution posted, and I'm having

Is there any possibility to run Storage Device Tests (
http://msdn2.microsoft.com/en-us/library/bb203117.aspx ) in a PC running
Windows XP?
If this will be possible, I could connect to my Windows Ce 6.0 device with

HI,all
    When the CETK connected my target device, there was an "!"(excalmatory
mark) in the storage device tests.
    I have tried to do the Flash Memory Read/Write and performance Test,but

I created a stress module mix using DB API and Filesystem API and tried to do
ran the test on ATA hard drive. Unfortrunately, it only ran for about 100
minutes, then hang detected by Platform builder. Of cource, I've modified the
MTU in the register to 1500 bytes, but it seemed ...

I recently read the article "Building and Testing Devices with the Windows
CE .NET Test Kit (CETK)" which can be found under
http://msdn2.microsoft.com/en-us/library/ms836772.aspx
So far I have questions about two statements from this article.

i have connected  motorola verzone device through active sync to my
pc.
and  when i am trying to run appverifier in the device, its giving me
error " couid not enable shim engine on device.

I had a question about the CETK v5.01 FSD Test Case 5014. When running this
test case with an SD Card inserted, the following message is displayed:
The current filesystem does not preserve file attributes on open files,
skipping test (this not an error).

Is there any way to change the KITL thread priority in Wince 6.0 .
Previously in Wince 5.0 this can done by using g_dwKITLThreadPriority
in OEMInit() and can be set to the desired value before kitlinit()
gets called..

I have not been able to get Application verified to run.  I have a WM 5
device but am trying to get it to run on the emulator first.  
Scenario 1
Using the emulator and the CETK I did the following.

I used CETK to test our machine. After I tested it, many problems that I
couldn't solve them.
Is there any updates about CETK?....Perhaps there has some discussion about
that before.