I am running performance tests of serial communication test and I get out of
range values in results (Driver is performing at... Negative value!) in
machine acting as master.
In target side results are in range. See the outputs:

If anyone knows how to tell "hopper.exe", "logger.exe" to log its
logfile
on a Storage Card (SD card) instead of the user store on
Windows Mobile device.

is there any possibility to run serial communication tests (stress and
performance tests) enabling hardware control?
Cheers

Hi ,all
I did the DShow Performance Tests,and I encountered the folling failure:
Failure loading library "dshow_glitchfree.dll".
Error 126: The specified module or a dependent module could not be found.

Hi ,all
I did the DShow Playback and Latency Tests ,and I encountered the folling
failure:
Failure loading library "graphtest.dll".

I was using AppVerifier to check any memory leak in a driver on Windows
Mobile 5.0 device. I built a new image with all environement variable set,
flashed it into device. Later I copied map files and pdb files also into
\Windows folder. I used shimexp.exe (copied to \Windows ...

I have an application running on WinCE .NET which I would like to test with
Application Verifier on, but cannot get the tool started.  I've been reading
the posts here concerning AppVerifier, but to no avail.
I do all of my communication through ActiveSync and am able to use the

We made a lot of CETK tests in 5.0 and we would like to use our tests
in 6.0 projects.  In 5.0, most of our .dll's referenced files in $
(_WINCEROOT)\OTHERS\WCETK\TUX\
However, in 6.0, $(_WINCEROOT)\OTHERS\WCETK does not exist.

I am developing C++ native applications for Windows CE 5.00 devices
(not Windows Mobile 5 - not Pocket PC/Smartphone, only general Windows
CE 5.00 device). I am trying to test my application with Application
Verifier CE.

Hi
I have a CE6.0 device that refuses to connect to my PC using TCP/IP
configuration.
CETK connects well (used clientside.exe and wcetk.txt on the device). But

hi, all
I did the Wall Clock and High Perf Drift Test via CETK6.0,
but I got the test failed with the details as follows:
   <TESTGROUP>

I need your help on running CETK Storage device test. Following test may
need some special setting or command lines. It will be great in my part if I
can get to know the command lines for these tests.
Storage Device Block Driver Read/Write Test

Hi,all
I did GTC Verify GetIdleTime Test with CETK6.0, finding the following
failed results. How can  I resolve the trouble? Thanks in advance.
<TESTCASE ID=7010>