I have already posted on platbuilder but I think it's more appropriated
to do it here.
I have a result log from hopper like this :
MTTF: INCIDENT TYPE DUMP THREAD 0xc87303f2 OWNER_PID 0xc8bf4eaa

I am beginner for windows mobile 6.
I listened the video tutorials posted at
http://msdn.microsoft.com/en-us/windowsmobile/bb264341.aspx.
By referring to “Using AppVerifier to debug Windows Mobile Applications”

Since upgrading from CE 6.0 to CE 6.0 R2, I don't see any output from
running CETK tests.  I can connect by including clientside in nk.bin via
project.bib and running "clientside /I=192.168.15.100 /P=5555" or by
choosing to "Start client" from the CETK Connection menu.  Either ...

I am running File system driver test on internal flash. By default it
runs test cases from 1001-1010 and 5001-5031. But in the
documentation
there are some more test cases such as 6001-6003 and 8001 and 9001.

I am not the first one to ask but how can I use appverifier on a WM6.
When I try appverifce.exe I always gvet an incompatible OS version ...
Does it mean I need to use appverifier directly on device ?
Wiil it work ?

Hi ~ all
I am runnig the Flash memory Read/Write Performance Test in a large
page flash (2K)
, but get the error as below.

Hi,all
  For the MLC Nand flash ,there are 2048 bytes in a sector.But I find the
CETK source code "#define DEF_SECTOR_SIZE  512 "for the test of nand .
So I always get the following output:

While I ran the test for GDI, i found some test case, for example 218,
would pass with some random seed but fail with others. for this case,
do i pass the CETK test for GDI system?
thanks

We've implemented KITL with both serial and USB serial in WinCE5.0.
Kernel debug is working properly, but CETK will fail randomly.
Sometimes we can do some little tests, such as OAL I/O Control test, but the
most of time CETK disconnected or even failed to execute.

I have written custom CETK test case for an I2C based device( This is a
stream Interface driver).When i am trying to run the test case using KITL
Test case is passing. At the same time when I use Active sync, the test case
is Failing.

I wanna run the SDIO Wi-Fi test cases on CE6, but cannot find the
"DummyWzcsvc.cab" which is should be installed in One-Card WLAN Card Miniport
Driver Test.
Does anyone know?

I am testing my WM5.0 device with CETK. In the Game API Test, it shows a
black screen with three rectangles which are RGB and with some letter. When I
tap the screen, screen will be rotated. Also, when I press some button like
"UP', "DOWN", etc, correspoding letter will be ...

I have problems running Camera CETK in CE6. When i run CETK, randomly it
gives data abort for k.coredll. And then i press go and it happily moves
ahead, and fails every test .. :)
I was fighting hard to get it working, but then i realised the same happens