Summary
This document is intended to provide a basic test plan overview for Wi-Fi
testing using Windows CE based devices and Windows Server 2008 and Network
Policy Server. (On Windows Server 2008 Internet Authentication Service (IAS)

 In Microsoft Radio Scenario Test Suite, it said that we could build up
our own Dailup_Server, but how? And I cann't find
"Building_Dialup_Server.doc". Is there somebody who can help me?
Thanks in advance!

  In Microsoft Radio Scenario Test Suite, it said that we could build up
our own Dailup_Server, but how? And I cann't find
"Building_Dialup_Server.doc". Is there somebody who can help me?
Thanks in advance!

My target device info:
Cpu: Marvel xscale PXA310
Wince 6.0 with all QFE's installed
I am trying to run the GDI test for CETK .The test passes all the ttest

When I go to install the Test Kit, I get the following error message:
"This installation package could not be opened.  Verify that the package
exists and that you can access it, or contact the application vendor to
verify that this is a valid Windows Installer package."

while performing CETK test of GTC verify idle time i am facing following
issue,
before that i tried to resolve the issue as per various posted notes like,
1Image is having minimal config(retail,all drivers and app disabled).

Hi,all
I did GTC Verify GetIdleTime Test with CETK6.0, finding the following
failed results. How can  I resolve the trouble? Thanks in advance.
<TESTCASE ID=7010>

After applying this QFE, GDI  CETK got a failure, which is #218 StretchBlt
failed.
It seems you're not using GDI CETEK test to verify such QFE fix?????????

I run CETK wavetest case 6000(Playback Mixing), it always failed with info
"Thread XX is still running". So I took a look at the wavetest source code in
folder "PRIVATE\TEST\MULTIMEDIA\AUDIO\WAVE\FUNCTIONAL\WAVETEST" and found
there's a bug.

I'm hoping someone else will have run into this and will know a
solution.
In summary, I cannot set breakpoints in the gdiapi CETK test.
The source path mapping has been set:

I was trying to test my CE6 platform(armv4) with CEStress over KITL.
PC side process(sserver.exe) was able to launch from CETK and I could
pick stress modules there.
But when I click the launch button, I always get "Launch Failed, No

visit http://www.e-nalanda.com to learn  RTOS Fundamentals &
Programming using µCos, Embedded Linux, 32 Bit ARM Architecture &
Programming, WinCE, Linux Device Driver (LDD), Embedded C, Operating
Systems Fundamentals (using Linux), C, C++, 8 Bit Microcontroller

WHat is the expected behavior of the OAL tests 606-608.?  Are they
supposed to fail in the CETK?
Thanks

i tried to run cetk tests on ce5 for pxa270 but wireless test has errors.
  ECHO:WARNING this test needs XWIFI11B1 [has WLAN1]
  ECHO:command wzctool -reset
  FAIL:Cannot run 'wzctool'. CreateProcess() failed, error=0x00000002

I am successfully able to run CEStress through the KITL trasport and
Manual Server settings.
But is it possible to run CEStress on ActiveSync. If yes, then how.
Thanks